Spuiterij Glanspunt · Voorbeeldstad
Thirza, Harm
and the booth.
Glanspunt is the spray shop of Thirza and Harm Ploeger. Harm has been spraying for 22 years, first at a kitchen factory, now in our own booth on the Voorbeeldstraat. Thirza does the colour advice and the planning. The four of us spray about five kitchens a week, plus cabinets, tables and doors.

Why we spray rather than brush
Harm spent years on the spray line of a kitchen factory. Every week he saw kitchens that technically had years left in them, but were thrown out because people no longer liked the colour. A waste, he thought. In 2016 he rented a shed with a single spray wall and went it alone.
Now we have a proper booth, a drying zone and a colour showroom where Thirza helps you choose. Because you can't see the right colour on a screen. You only see it on a test panel, in your own kitchen light.
“You don't see a good coat of lacquer. You only see a kitchen that looks new.”Harm Ploeger
- 22 yearsof Harm's spraying experience
- 7 working dayswithout doors, often less
- 3 yearsguarantee on adhesion
Showroom
Twenty colours in four gloss levels.
Every Saturday from 10:00 to 14:00. Feel free to bring a front from your own kitchen.
The workshop
Where your fronts spend a week.
Spray booth
7 × 4 metres, with positive pressure and filters in the ceiling and floor. Not a speck of dust on the lacquer.
Drying zone
Curing at 40 °C. That way the lacquer is hard enough to sand after one night.
Mixing system
We mix our own, in any RAL or NCS colour and the colours of well-known paint brands.
2K PU lacquer
The same lacquer kitchen factories use. Scratch-resistant, grease-resistant, odourless once dry.
How we work
From your first picture to adjusting the hinges. Five steps, usually in two weeks.
- 1
Send photos
An overview, a detail and the size of one front. Two working days later you know the price.
- 2
Choose a colour
A test panel in your colour and gloss level, for €25. We deduct that amount later.
- 3
Collection
We dismantle and take everything with us. Your kitchen stays usable, just without doors.
- 4
Spraying
Sanding, priming, sanding between coats and two coats of 2K lacquer. Curing at 40 °C.
- 5
Refitting
We hang everything back, adjust the hinges and leave no packaging behind.
Three photos,
one price.
That's all we need to price your kitchen. Upload them below or message them to 06 12345678. Two working days later there's a price, and nobody needs to visit you.
- The whole kitchenFrom a distance, with the lights on.
- One front close upSo we can see the surface and the edges.
- The size of one frontHeight and width, to the centimetre.